Changing the current of a stepper driver

The power of a stepper motor is regulated by the input voltage and the current. The input voltage generally cannot be adjusted, as other components in the 3D printer depend on it. But the current can often easily be adjusted. Depending on the type of stepper driver, the current may be adjusted differently.

On Pololu style stepper drivers and 3D printer controller board, you will find a small set screw, called a trimpot. By adjusting it you reduces or increase the current, depending on the stepper driver. Be careful adjusting the trimpot, it may break easily. Always disconnect power before adjusting the trimpot.

Bigger stepper drivers may have dip-switches (small white switches), that change the current. Check the datasheet for more information on how to set the switches.

Note that setting the current of the stepper driver too high, may cause overheating. This generally appears a random displacement of the print head, but is cause by the stepper shutting down for a small while, until the temperature has cooled down a bit.

Why ReprapWorld?
  • Orders dispatched same business day
  • 3.000+ products in our assortment
  • More than 45.000 satisfied customers in over 40 countries
  • Secure payment for all payment options
  • Professional tech support (over 10 years 3D experience)
45.000+ satisfied customers
4.4 stars on Google
Pay safely using


About ReprapWorld
ReprapWorld

ReprapWorld is the number one webshop for all your reprap supplies for your 3D printer. We have a large collection of 3D printer components, from our famous electronics lines to filament from our own production. And everything is at a very competitive price!

Contact

RepRapWorld B.V.
Klopperman 7
2292JE Wateringen
The Netherlands

Email: info@reprapworld.com
Tel: +31 (0) 85 - 009 15 31

Copyright 2009 - 2020 | ReprapWorld B.V.