PVA filament Neutral 2.85 mm 500 g is a superior quality filament produced in The Netherlands. Real filaments guarantees that PVA is high-quality, diameter-accurate filament, resulting in the best 3D printing experience. PVA is soluble in warm water and prints roughly at the same temperature as PLA, making it a great material as support of your 3D print. With a dual head 3D printer, you can setup your favorite slicing software to print a part of the model in PVA and remove it later.
You can print PVA at max. 225 degrees, in any 3D printer. The heated bed is optional with 3DLac, but recommended. Depending on your settings, sufficient bonding with other materials may take a few attempts to get right. For more advanced versions check out the PVA plus and PVA Pro, which bond better to other materials. PVA is a very hygroscopic material, so it will absorb moisture pretty quickly. Keep sealed at room temperature when not in use to extend shelf-life as much as possible.
This is a kit of the following items.
|10x||Shielded ball bearing 624ZZ|
|10x||F624ZZ Shielded ball bearing (Flanged)|
|Weight filament||500 g|
The base material used in the filament. For more information on the different materials, please check the Filament information page
|Temperature - extruder||180 °C|
|Temperature - heated bed|
|Heated bed temp. - Kapton|
|Heated bed temp. - Print sticker|
|1 - 9:||excl £ 27.52 incl £ 33.30|
|10 - 29:||excl £ 23.37 incl £ 28.28|
|30 - :||excl £ 19.23 incl £ 23.26|
|Need a larger quantity? Contact our Sales department.|