Thermocouple cartridge K-type (1M)

Increase your temperature accuracy using this thermo couple
Stock - GB: 0
Stock - NL: >100
£ 11  incl VAT In stock
>100 in stock in NL, shipping in 7-12 days

Product description

Increase your temperature accuracy using this thermo couple

With this Thermocouple you wil reach very precious temperature measurements. The cable has a length of 1 meter and at the end a fork terminal. This is to connect it easily. The cartridge has a diameter of 3mm and a length of 15mm. You can use it with the E3D heater block. 

NOTE: This thermocouple needs to be supported by your 3D printer. Megatronics and Ultratronics accept this thermo couple. For RAMPS you need the adapter board.

Specifications

General properties
SKU THERMOCOUPLEK
GTIN 8719345004254
Sensor type K
Connector end Bare
Type Thermistor
Resistance 100 Ω
Dimensions
Outer diameter 3 mm
Wire length 100 cm
Length 15 mm
£ 11  incl VAT In stock
>100 in stock in NL, shipping in 7-12 days
Price breaks
1 - 4: excl £ 9.17 incl £ 11
5 - 9: excl £ 8.75 incl £ 10.50
10 - 29: excl £ 8.33 incl £ 10
30 - : excl £ 8.13 incl £ 9.75
Need a larger quantity? Contact our Sales department.

Copyright 2009 - 2022 | ReprapWorld