E3D

PT100 Amplifier Board

Print at higher temperatures with better accuracy and easier assembly
Stock - GB: 12
Stock - NL: >50
£ 21  incl VAT In stock
Dispatches same business day!
Others also bought:
PT100 sensor cartridge
E3D
PT100 sensor cartridge
Original E3D PT100 sensor cartridge
£ 14.50

Product description

E3D PT100 Ampliefier board is specifically designed to allow the use of the E3D PT100 sensor.

The PT100 Amplifier board allows you to connect a PT100 sensor on a electronics solution which does not support RTD Sensing.

The board amplifies the signal coming from the PT100 sensor to a voltage which can be read on any analog input pin of most controller boards. The board is designed in such a way that selecting temperature sensor '20' in the well known Marlin firmware will allows you to get correct calibration values.

Benefit of using a PT100 is a more accurate temperature sensing and the ability for the hotend to function with temperatures up to 400°C. This high temperature is needed for more special materials like Nylon, Polycarbonate, Peek, etc. The name PT100 is derived from the material used in the sensor Platinum (PT) and the 100 ohm resistance at 0°C.

Specifications

General properties
SKU E3DPT100BOARD
GTIN 8719345009785
MPN E-BOARD-PT100
Type PT100
Dimensions
Thickness 1.5 mm
Mounting hole size 3.2 mm
Length 38 mm
Width 28 mm
£ 21  incl VAT In stock
Dispatches same business day!

Copyright 2009 - 2022 | ReprapWorld