Filament run-out sensor ( 2.85mm )

Stock - GB: 9
Stock - NL: 0
£ 5.20  incl VAT In stock
Only 9 left, order now!

Product description

Affordable tool to avoid failed prints, by detecting a filament run-out. Can be easily used on a endstop header and most firmwares will support this feature.

This product comes with a meter long wire which connects to your electronics. Use the following wiring schema:

  • Red - +5/3V
  • Black - Ground
  • White - Signal

Detection is active-high, which means that the signal line will be high, when filament is detected. The detector is black and has a clear arrow marking for the filament direction, a small green led show that filament is detected. The sensor can be mounted using two 3mm holes, for example directly onto a cold-end.

Specifications

General properties
sku FMDM285
gtin 8719345009655
Type Mechanical switch
Color Black
Dimensions
Mounting hole size 3 mm
Wire length 100 cm
Product Dimensions 30x22x13 mm
Electrical specifications
Operating voltage 3.3 / 5 V
£ 5.20  incl VAT In stock
Only 9 left, order now!
Price breaks
1 - 4: excl £ 4.33 incl £ 5.20
5 - 9: excl £ 4.08 incl £ 4.90
10 - 29: excl £ 4 incl £ 4.80
30 - : excl £ 3.92 incl £ 4.70
Need a larger quantity? Contact our Sales department.

Copyright 2009 - 2022 | ReprapWorld