Buy PVA filament in the UK

Discover 3D printing with PVA, a 3D filament used as support material for PLA filament. We offer premium PVA filament available in the standard diameter sizes 1.75 mm and 2.85 mm.


About PVA filament

Polyvinyl Alcohol (PVA) is a filament material well known to reinforce 3D materials such as PLA filament. The filament has a white translucent appearance and is resistant to oil and grease. One of the best aspects of PVA filament is its water-soluble properties allowing easy removal of the filament’s support structures. For this reason, it is crucial to avoid moisture and store your PVA filament correctly in a drying box or use silica gel bags.

Printing temperature200°C-225°C
Strength⭐⭐⭐⭐
Heated bed40°C-60°C
Eco-friendly
EnclosureNot required

Printing with PVA filament

PVA filament has been created to be used by a 3D printer with a dual extrusion system. One extruder will typically print PLA filament while the second extruder prints PVA filament support structures. Our multi-head 3D printers will allow you to successfully print with two filament materials simultaneously.

The printing temperature and heated bed temperature for your PVA filament will slightly vary depending on your 3D printer and the brand of PVA filament that is being used. Always check the manufacturer’s printing instructions and experiment with your 3D printer to find the settings that work best. A great brand that guarantees high-quality prints is Real Filament. In case you would like to use another material for the 3D model, we have special PVA filament for PETG filament.

PVA filament is non-toxic and biodegradable when recycled properly. Do avoid exposing PVA filament to natural light as it is highly sensitive to UV radiation. In case your PVA filament has absorbed moisture, it is advised to place it in the oven at a low temperature for a short amount of time before you start printing to avoid printing errors.

Printing with PVA filament support structures

There are a number of settings and configurations to take into account when printing support structures. The foundation is the most important, hence proper adhesion will make or break the quality and function of a support structure. Select a density that will best support your 3D part. The angle of your overhang will determine how much PVA filament support is required. A 3D printing software will often automatically generate support structures for your models which you can then adjust to your preferences.   

How to easily remove PVA filament from 3D models

Once your print is complete and has cooled down it is time to remove the PVA filament support structures. The supports can sometimes be broken off by hand however be careful if you choose to do so as this could damage the print. The first most important step is to submerge the printed part in a container of warm water. This will effectively dissolve the PVA filament structures. Any excess material can be removed with pliers. The water used to dissolve the support structures can be disposed of down the drain given that you live in a region with water networks linked to a waste treatment plant.

PVA plus and PVA pro

View our special PVA filament by the premium brand Real Filament. The PVA plus filament has been specially developed to function as a support material for many thermoplastics such as PLA filament and PETG filament. We also offer PVA pro filament which works in high temperatures and bonds well with ABS filament, ASA filament, and TPU filament.

Would you like some more information on PVA filament? Feel free to reach out to our customer service for assistance!


Frequently asked questions

How can I print with PVA filament?

To successfully print with PVA filament, you will need a dual head 3D printer. One extruder will print the PVA supports while the other extruder prints the filament material for the 3D model itself. PVA filament prints best between the temperatures of 200°C-225°C

What temperature can I print PVA?

Normal PVA filament should be printed at a maximum temperature of 225°C. PVA plus filament prefers to be printed at a temperature range between 210°C-230°C while PVA pro is best printed at temperatures not higher than 250°C. Be sure to check the instructions for the 3D filament as printing temperatures can tend to differ.

To what materials does PVA filament adhere?

PVA filament has been made to bond well with PLA filament, providing excellent support for PLA 3D models and parts. PVA plus filament has been specifically developed to bond with materials such as PETG filament and ABS filament. Our PVA pro filament bonds well with ABS filament, ASA filament, and TPU filament.

Does PVA stick to PETG filament?

PVA filament does not stick to PETG filament and cannot be used as a support material. At RepRapWorld we sell PVA plus filament that will stick to PETG filament, providing excellent support.

Does PVA stick to ABS filament?

PVA filament does not stick to ABS filament, however, at RepRapWorld we sell PVA pro filament that will bond well with ABS filament, giving appropriate support.

Is printing with PVA filament hard?

Printing with PVA is not difficult. With a dual extrusion 3D printer, you can easily perform printing supports for your parts. The maximum print temperature for PVA is 225°C and the maximum heated bed temperature is 60°C. An enclosure is not required when printing with PVA filament.

Why ReprapWorld?
  • Orders dispatched same business day
  • 3.000+ products in our assortment
  • More than 45.000 satisfied customers in over 40 countries
  • Secure payment for all payment options
  • Professional tech support (over 10 years 3D experience)
45.000+ satisfied customers
4.4 stars on Google
Pay safely using


About ReprapWorld
ReprapWorld

ReprapWorld is the number one webshop for all your reprap supplies for your 3D printer. We have a large collection of 3D printer components, from our famous electronics lines to filament from our own production. And everything is at a very competitive price!

Contact

RepRapWorld B.V.
Klopperman 7
2292JE Wateringen
The Netherlands

Email: info@reprapworld.com
Tel: +31 (0) 85 - 009 15 31

Copyright 2009 - 2021 | ReprapWorld B.V.